wooden Keychain for Father.
One side with scores and the other side with engraving.
I made 4 pcs with different designs.
All designs were individual files.
Basic Information is loading...
Step 1
Add a wooden keychain and design.
Please make sure all keyring must flat lay down on the base plate.
or you can use the double tape to not move on the base plate when engraving.
If not, The keychain will move and the design can not be engraved into a keychain.
Step 2
Setting 1
Process Method
Laser Score
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
90
Speed(mm/s)
40
Bitmap mode
Grayscale
Other Parameters
Auto measure
Add setting to score. and start the process.
Step 3
Setting 1
Process Method
Bitmap Laser Engrave
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
80
Speed(mm/s)
120
Lines per cm
120
Pass
1
Bitmap mode
Grayscale
Flip the keychain and replay all designs onto Keychain.
Add a wooden keychain and design.
Please make sure all keyring must flat lay down on the base plate.
or you can use the double tape to not move on the base plate when engraving.
If not, The keychain will move and the design can not be engraved into a keychain.
Add setting to score. and start the process.
Flip the keychain and replay all designs onto Keychain.
Add setting for engraving. and start.
Spray the clear code to get better Quality.
Thank you for watching.
Feel free to comment.