Mother's Day is coming soon, try to make an everlasting rose as a gift!
Basic Information is loading...
Step 1
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
95
Speed(mm/s)
30
Pass
1
Import the pattern into XCS software, connect the machine, put in the felt, manually focus, select laser mode (Laser flat), confirm the pattern position by walking around the border, and finally start laser cutting.
Step 2
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
10
Pass
1
After completing the felt cutting, proceed to the wood cutting. Put the wood in, manually focus, confirm the pattern position by walking around the border, and finally start laser cutting.
Step 3
After cutting, use solid glue to bond the felt and wood together, and you're done!
NOTE
When cutting wood, it is recommended to add an air-assisted device, otherwise, the wood is prone to yellowing and blackening.
Import the pattern into XCS software, connect the machine, put in the felt, manually focus, select laser mode (Laser flat), confirm the pattern position by walking around the border, and finally start laser cutting.
After completing the felt cutting, proceed to the wood cutting. Put the wood in, manually focus, confirm the pattern position by walking around the border, and finally start laser cutting.
After cutting, use solid glue to bond the felt and wood together, and you're done!
NOTE
When cutting wood, it is recommended to add an air-assisted device, otherwise, the wood is prone to yellowing and blackening.