I came up with a fantastic idea for the wedding reception - a collection box for all the guests to jot down their lovely messages and well-wishes for the happy couple!
Basic Information is loading...
Step 1
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
8
Pass
1
Setting 2
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
20
Pass
1
Place the wooden board on the D1 Pro machine, import the design, and adjust the position of the design. You are now ready to proceed.
Step 2
Once the cutting is complete, assemble and secure the box using a hot glue gun or strong adhesive.
Place the wooden board on the D1 Pro machine, import the design, and adjust the position of the design. You are now ready to proceed.
Once the cutting is complete, assemble and secure the box using a hot glue gun or strong adhesive.
For more details and examples, please refer to our video tutorial: https://www.youtube.com/watch?v=CG2iqG6a9X4
NOTE
1. When cutting the wooden board, make sure to use the Air Assist to prevent discoloration.
2. The P-series machine should be used to cut transparent acrylic as the D-series machine is not able to process this material.