Check out our amazing natural vintage jewelry rack in the shape of a large tree! It's perfect for holding all your favorite jewelry pieces and adding a stylish touch to your space.
Basic Information is loading...
Step 1
Setting 1
Process Method
Laser Cut
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
22
Pass
1
Import the file into the XCS software. The drawing file has two canvases - the tree jewelry rack and its base. Arrange both designs on the wooden board, as depicted in the picture. Click auto-measure, fine-tune the parameters, and click process to frame the cutting range. When completed, start cutting.
Step 2
After cutting, assemble the three parts together according to the picture.
Step 3
Finish! Now you can decorate the tree with your jewelry!
NOTE
Once the assembly is finished, it is advisable to apply wood glue to the joints for added strength.
Import the file into the XCS software. The drawing file has two canvases - the tree jewelry rack and its base. Arrange both designs on the wooden board, as depicted in the picture. Click auto-measure, fine-tune the parameters, and click process to frame the cutting range. When completed, start cutting.
After cutting, assemble the three parts together according to the picture.
Finish! Now you can decorate the tree with your jewelry!
NOTE
Once the assembly is finished, it is advisable to apply wood glue to the joints for added strength.