Step6: Put all sides together to complete your work
Step7: Final look
Design Files
This box can be used to store many of your tools and gadgets. Make one for yourself or your loved ones as a gift!
Basic Information is loading...
Step 1: Import the design into XCS
Setting 1
Process Method
Laser Cut
Process Material
3mm Basswood Plywood
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
7
Pass
1
Start by importing the design file into XCS software. The file consists of 2 canvases.
Place the basswood correctly, adjust the settings as needed, and click process to frame the cutting range. Once finished, proceed to the cutting process.
Step 2: Cut all the components
Now it's time to cut all the components needed for the jewelry box.
Step 3: Assemble the box body
Next, follow the picture to assemble the box body.
Step 4: Assemble the cover of the jewelry box
Assemble the top cover of the jewelry box as shown in the picture
Step 5: Assemble the decorative parts
Put together all the decorative parts of the jewelry box.
Step 6: Put all sides together to complete your work
Finally, assemble the box cover and body together. Congratulations! Your work is complete.
Step 7: Final look
After the assembly is completed, it is best to use woodworking glue to strengthen the joints
Start by importing the design file into XCS software. The file consists of 2 canvases.
Place the basswood correctly, adjust the settings as needed, and click process to frame the cutting range. Once finished, proceed to the cutting process.
Now it's time to cut all the components needed for the jewelry box.
Next, follow the picture to assemble the box body.
Assemble the top cover of the jewelry box as shown in the picture
Put together all the decorative parts of the jewelry box.
Finally, assemble the box cover and body together. Congratulations! Your work is complete.
After the assembly is completed, it is best to use woodworking glue to strengthen the joints