Some of us have the gift of deftness with a knife... Others aren't even trusted with a spoon (myself)... Thought it'd be nice to skip the mess and let the laser do all the work!
Basic Information is loading...
Step 1: open the XCS file and setup
Setting 1
Process Method
Vector Laser Engrave
Power(%) or Cut Pressure(g)
100
Speed(mm/s)
200
Lines per cm
240
Pass
3
Open the XCS file and get your pumpkin set up… Extra items to keep it from rolling around will be helpful.
Set your focus, check your frame… with a rounded object, you'll want to set your focus down a little since the focus area will most likely be the highest point.
Open the XCS file and get your pumpkin set up… Extra items to keep it from rolling around will be helpful.
Set your focus, check your frame… with a rounded object, you'll want to set your focus down a little since the focus area will most likely be the highest point.
I ran 3 passes. You may wish to do more or less.