Projects
Designs Forum Contests
Tent with Light in display house Gift
82
1101
3
Design Files
  • tent laser for xtool.xcs
    • Contents
    Introduction
    Basic Information
    Instruction
    Design Files
    Tent with light, tree and bench in display House
    Basic Information is loading...
    Step 1: Add the Design File to XCS

    add the design files or open the downloaded file in XCS

    Step 2: Cut the files
    Setting 1
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    4
    Pass
    1

    Cut all files with above setting.

    Step 3: Clean all parts after cut

    clean all edges of burned carbons with alcohol and smooth cloths.

     

     

    Step 4: assembly

    Assembly all parts by using wood glue.

    I used the gorilla wood glue.

    And let them dry.

    Step 5: Put to display box

    Put the LED strip into the tent.

    and put the plastic grass onto the bottom of the display box.

    And places the tent, tree and bench in to display house.

    And close the display box lid.

    Works are done!

    Thank you

     

     

    Design Files
    tent laser for xtool.xcs
    gifts
    Do you like this how-to?
    Remixes (0)
    Add Remix
    There are no remixes yet.