Cut your felt yardage with scissors if necessary to fit your machine. The finished size is 350 x 284.5 mm (13.78 x 11.2").
Step 2
Measure the thickness of your felt with a caliper.
Step 3
Setting 1
Process Method
Laser Cut
Process Material
Fabric
Power(%) or Cut Pressure(g)
40
Speed(mm/s)
8
Pass
1
Take a scrap piece and make test cuts for the best setting. In my experience: each felt color requires slightly different settings for best results.
Step 4
Place the felt on the prisms or a honeycomb.
Step 5
Cut the felt with your settings. For me, this took about 35 minutes. (Please always supervise the cutting to be able to react immediately in case of a flare-up).
Step 6
To be able to remove the cut out parts well I use a weeding hook.
Cut your felt yardage with scissors if necessary to fit your machine. The finished size is 350 x 284.5 mm (13.78 x 11.2").
Measure the thickness of your felt with a caliper.
Take a scrap piece and make test cuts for the best setting. In my experience: each felt color requires slightly different settings for best results.
Place the felt on the prisms or a honeycomb.
Cut the felt with your settings. For me, this took about 35 minutes. (Please always supervise the cutting to be able to react immediately in case of a flare-up).
To be able to remove the cut out parts well I use a weeding hook.