risers to place under the honeycomb to save the regular fitting and unfitting of the leg extenders when switching between the rotary and flat laser work. Easy to scale for different heights! Very Easy!
Basic Information is loading...
Step 1: Resize the parts to your needs
resize the parts by selecting the parts together and dragging the top centre point only either up or down and unlock the padlock first to keep slits the right size and the base large enough to keep them stable!
This set is about 91mm tall and 80mm wide at the base, only change the height!
Step 2: Cut the required number of parts
cut the parts, for the d1 pro 10w i used 100% power at 4 mm/s speed for 3mm birch plywood
Step 3: slide the parts together
slide the 2 parts together as shown in the image
Step 4: glue if required (optional).
Run a bead of Ca glue down the joint if required but not essential
resize the parts by selecting the parts together and dragging the top centre point only either up or down and unlock the padlock first to keep slits the right size and the base large enough to keep them stable!
This set is about 91mm tall and 80mm wide at the base, only change the height!
cut the parts, for the d1 pro 10w i used 100% power at 4 mm/s speed for 3mm birch plywood
slide the 2 parts together as shown in the image
Run a bead of Ca glue down the joint if required but not essential
Use the parts as shown