My neighbor and I have a love for The Beatles. It is his birthday in a few days and I decided to make him some slate coasters.
2 More images
Basic Information is loading...
Step 1: Beatles coaster
I found the picture online and uploaded it to the IMAGR program. From IMAGR I cropped and resized the image down to 50%. then pressed the material button and changed it to grayscale, grayscale. Then I adjusted the gamma, contrast, brightness, and sharpness on the left sidebar. When I was done with all the adjustments I then downloaded it as a PNG. Once it was in png format I uploaded the image to xcs for engraving.
I found the picture online and uploaded it to the IMAGR program. From IMAGR I cropped and resized the image down to 50%. then pressed the material button and changed it to grayscale, grayscale. Then I adjusted the gamma, contrast, brightness, and sharpness on the left sidebar. When I was done with all the adjustments I then downloaded it as a PNG. Once it was in png format I uploaded the image to xcs for engraving.
my settings are for the s1 40w
30% power/240 speed/1 pass/200 LPCM
approximately 7:31 mins to process