Step5: Glue wood and MDF then spray on gloss clear coat
Design Files
I made this for people who like cats.
Basic Information is loading...
Step 1: Cut hanger holes and paint MDF round
Setting 1
Process Method
Laser Cut
Process Material
3mm MDF Board
Power(%) or Cut Pressure(g)
65
Speed(mm/s)
5
Cut hanger holes then paint MDF round for base.
Step 2: Cut bottom section out of 1/4" birch
Setting 1
Process Method
Laser Cut
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
60
Speed(mm/s)
9
The most important thing to remember is to save the “middles” when cutting letters that are not script. If you stick them on painter's tape on a paper plate they are easier to paint.
Step 3: Cut outline for "Welcome"
Setting 1
Process Method
Laser Cut
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
60
Speed(mm/s)
9
Cut the background out of ¼" birch then paint in color of choice.
Step 4: Cut "Welcome"
Setting 1
Process Method
Laser Cut
Process Material
Transparent Acrylic
Power(%) or Cut Pressure(g)
60
Speed(mm/s)
7
Cut acrylic from the back with both protective layers still attached for a cleaner finish. Image needs to be flipped.
Step 5: Glue wood and MDF then spray on gloss clear coat
Be sure to save acrylic “ Welcome” to glue on after clear coating.
Cut hanger holes then paint MDF round for base.
The most important thing to remember is to save the “middles” when cutting letters that are not script. If you stick them on painter's tape on a paper plate they are easier to paint.
Cut the background out of ¼" birch then paint in color of choice.
Cut acrylic from the back with both protective layers still attached for a cleaner finish. Image needs to be flipped.
Be sure to save acrylic “ Welcome” to glue on after clear coating.