Projects
Designs Forum Contests
Turtle Keyring D1 Pro 5W
278
2689
5
Design Files
  • turtle.xcs
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    Second little project on the D1 using XCS and 3mm birch plywood. My daughter wanted to create a birthday gift for a friend and decided upon this little chap. She started with a full colour image in ProCreate on an IPad tracing out the layers and infill for engraving. Once this was copied (cut / paste) into XCS, I added the border (outline option in top tool bar) with a 2mm offset. Played about a bit with the speed / intensity until I got something that worked for me - Then let it run - Hope you like it folks....
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Bitmap Laser Engrave
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    90
    Speed(mm/s)
    75
    Lines per cm
    100
    Pass
    1
    Bitmap mode
    Grayscale
    Setting 2
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    5
    Pass
    2
    Design Files
    turtle.xcs
    Keyring
    Turtle
    simple project
    Do you like this template?
    Remixes (0)
    Add Remix
    There are no remixes yet.