Projects
Designs Forum Contests
Dog Tag Jig for xTool F1
391
4784
6
Design Files
  • F1_DogTagJig.xcs
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    Similar to my Business Card jig (how-to link below) for the xTool F1 - this one is for engraving batches of Dog Tags.

The jig is designed, so the F1 cover can be closed during engraving, and the tags can be removed easily after engraving

The project file:
Two pieces will be cut out and each has a score mark of the other part to help align the parts.
The F1 is too small to cut the pieces, so I made this on the P2
Detailed how-to can be seen here: https://projects.xtool.com/howtos/2030
    2 More images
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Laser Score
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    15
    Speed(mm/s)
    160
    Pass
    1
    Setting 2
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    27
    Pass
    1
    Design Files
    F1_DogTagJig.xcs
    F1
    Dog Tag
    P2
    Jig
    FirstTimer
    LongTimeContributor
    Do you like this template?
    Remixes (0)
    Add Remix
    There are no remixes yet.