Projects
Designs Forum Contests
Bottle Opener Jig
146
1422
2
Design Files
  • BottleOpner.xcs
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    This project is for the F1. 
The cut and engrave settings are in the project for making the template. 
Cut the Base Plate and the Jig and glue them together. You will need to sand the edges for a good fit in the F1. The third tab is for engraving the bottle openers. You will need to set your engrave settings. I have done this in XCS as not everyone will have lightburn or experience with it.

Edit 
Updated XCS file for tab 3 added example text. 
Tested Framing all good   
Remove the Standard Base Plate and fit the jig.
    4 More images
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Laser Cut
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    2
    Design Files
    BottleOpner.xcs
    XCS
    F1
    Bottle Opener
    Do you like this template?
    Remixes (0)
    Add Remix
    There are no remixes yet.