Projects
Designs Forum Contests
Lissajous Figure Coaster 34
3
78
0
Design Files
  • LissajousProject.xcs
    F1
  • CONVERT.png
    • Contents
    Introduction
    Basic Information
    Settings
    Design Files
    Four Lissajous figure coaster variations, also known as Bowditch Curves.

Protect your surfaces with these beautifully detailed coasters. 

This was precisely etched with an xTool-F1 laser, creating sharp, clean lines.

I used this jig: https://than.gs/m/972004?affiliateCode=PILED

100x100x5.5mm Eucalyptus red-faced plywood
    Basic Information is loading...
    Settings
    Setting 1
    Process Method
    Bitmap Laser Engrave
    Process Material
    Walnut Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    100
    Pass
    1
    Bitmap mode
    Jarvis
    Other Parameters
    Dot duration: 350 Power: 100 DPI: 300 Pass:1 Bitmap mode: Jarvis xTool projects required an input for speed when not relevant for xTool F1.
    Design Files
    LissajousProject.xcs
    CONVERT.png
    figure
    maths
    art
    math
    engrave
    etching
    F1
    XCS2
    coaster
    Do you like this template?
    Remixes (0)
    Add Remix
    There are no remixes yet.